Wax in cartridges: what is it and how to use it

The question of how to heat the wax in a cartridge arises for many girls who have just tried wax depilation. The easiest way is to heat the wax in the cartridge using a special device - a wax melter, but if this device is not at hand, then you should go the other way. You can heat the wax in a cartridge at home without a wax melter using a microwave or a water bath. Each of these methods has its own advantages and disadvantages. Today we’ll talk about how to heat up wax without a wax melter at home. Read the following article on the pages of the magazine.

How to heat wax in a cartridge

The main thing when performing depilation with warm and hot wax is caution and minimizing the risk of burns.
The main thing when performing depilation with warm and hot wax is caution and minimizing the risk of burns. If waxing is regularly carried out at home, the ideal solution would be to purchase a portable wax heater.

The cartridges contain warm wax; its operating temperature is 37–45 °C. It is plastic, has good adhesive properties, and does not leave burns. The wax in cartridges varies. Don’t forget to check with the seller which areas it is suitable for hair removal

The wax in the cartridges is heated if it has a liquid consistency and a temperature that is comfortable for the skin. Melting time depends on the packaging. If the cartridge has thick walls, it will take longer for the contents to heat up.

Do not overheat the wax, as this can cause a burn. Melting of the mass often depends on the packaging in which the substance is located. The dense walls of the cartridge do not allow heat to pass through well, so a longer period will be required.

How to heat wax in a cartridge without a wax melter

If there is no special device in which the cartridge is heated, then it is worth thinking about how to melt the wax using improvised means. The easiest method to melt wax at home is a water bath. The method is good for its accessibility, since to implement it you only need a container that can be put on fire. Place the wax cartridge in a saucepan, fill one third with water and turn on low heat. It is not necessary to bring the water to a boil, since the wax begins to melt at a fairly low temperature. The second most popular method is using a microwave.

The second method is simpler, while the first is more effective - a water bath allows you to maintain the required temperature of the wax throughout the entire depilation process.

The essence of waxing (waxing)

To remove excess hairs from the surface of the skin, wax is applied along the hair growth and then sharply torn off in the opposite direction, i.e. against the growth of the hairs.

When the waxy material is lifted from the skin surface, the hair adhering to it is removed along with the follicles. As a result, the skin becomes smooth for 3-4 weeks.

The optimal hair length for waxing is 3–4 mm.

Waxing involves different methods of applying wax to the skin:

  • using a spatula;
  • from the cartridge.

It should be noted that using cassette wax application greatly simplifies the procedure, since the wax layer is uniform and thin . This saves both material consumption and time.

The wax is applied in the direction of hair growth and torn off in the opposite direction.

How to heat wax in a cartridge in a water bath

Wax can also be heated using hot steam. You need to fill a pan with water and place an iron can with wax or a colander in it. Please note that the liquid level should not be higher than the level of the can. Next, put the pan on high heat and make sure that moisture does not get into the wax, otherwise you may get burned when removing hair, and the quality of depilation will decrease. Don't forget to leave the dishes open. After the water boils, reduce the heat and continue heating the wax.


You need to fill a pan with water and place an iron can with wax or a colander in it

Keep it on the stove for 5 to 10 minutes, depending on the amount of hair removal wax in the jar. Never let the wax boil. Check the temperature of the wax before you begin cosmetic procedures. It should not exceed 60 degrees, otherwise you will get burns. Mix the mixture thoroughly, moving the spatula from the center of the container to the edges. Apply a small amount of the substance to the inside of your wrist - the finished wax should be hot, but at the same time comfortable. When the wax is warm, apply it to the skin with a special spatula.

Before you begin the depilation procedure, you should check the temperature of the product. To do this, apply a small amount of the mixture to the inside of your wrist. The composition should be hot, but not scalding. Granular or lump wax must first be poured into a suitable container and burned in the manner described above.

During the procedure, the dishes with the wax composition should be in a pan with hot water so that the mass does not cool down too quickly. This is the disadvantage of this method: particles of condensation get into the wax and can worsen the quality of depilation or cause burns.

Hair removal using the waxing method allows you to achieve the effect of smooth skin for a long time. Professional cosmetologists use only high-temperature alloys, which significantly reduces discomfort. Knowing how to melt wax for depilation at home, you can successfully carry out the procedure on your own, without resorting to the services of beauty salons.

Classification

The raw materials for the procedure differ according to several criteria, the main one of which is the melting point.

The wax depilator is designed to heat the wax placed in the cartridge to the required temperature.

According to the melting temperature, wax is divided into:

  • Cold . There is no need to heat it, it does not require special devices. On sale you can find raw materials in a jar or in the form of paper depilatory tapes. The tapes are warmed between the palms, glued to the desired area and sharply torn off against the growth of the hairline. The raw materials in the tube can be heated on a radiator, in the palms of your hands, or in a glass of hot water. The product is applied to the skin, a paper strip is glued on top, and torn off in the direction of hair growth. Convenient to use on the road, in a hotel, or in the absence of conditions for warming up.
  • Warm . Sold in cassettes with a roller. Sometimes you can find a wax composition in a jar. Before use, the raw materials must be heated. You can melt the wax using a steam bath or wax melter. When the viscosity of the composition resembles honey, apply to the skin and remove with a paper strip.
  • Hot . It is the most favorite among wasking specialists. Available in the form of briquettes, granules, tablets and plates. How many degrees does it take to warm up? Within 37°-55°C. The temperature regime is affected by the composition of the product. Various options for melting wax: using a wax melter, microwave, or in a steam bath. Apply to the skin using a special spatula. After hardening, remove along with the hairs. It is the hot mass that makes the procedure effective and painless.

How to heat wax in a cartridge in the microwave

If you don’t have a wax melter at hand, you can heat the cartridge in the microwave.
If you don’t have a wax melter on hand, you can heat the cartridge in the microwave. To do this, the cassette must be freed from packaging and foil and sent to the oven. Warm-up time varies between 1–3 minutes. This depends on the amount of wax in the cartridge, as well as on the power of the microwave. After heating, you need to carefully apply the wax to your wrist and determine how easy it is to apply and whether there is a danger of burning the skin. If the need arises, the cartridge can be additionally heated for 10–15 seconds. You can heat the wax as many times as you like - this does not in any way affect its properties and quality.

Important: the package must be opened! Otherwise the contents may explode. Before placing the wax in the microwave, remove all foil from the product packaging.

Before application, apply a degreasing lotion to the skin. It is necessary to apply wax according to hair growth, and tear it off against growth. After finishing the session, apply a soothing cream to the depilation area.

What to do after the procedure

After using cassette wax, the skin should be moisturized at least twice a day. The need for this is explained by the fact that at the moment the wax comes off, the skin surface receives microtraumas through which moisture is lost, so irritation may occur in the form of itching and peeling.

It is recommended to use a scrub twice a week to prevent ingrown hairs. New hairs, as a rule, grow thin and weak, and quite often they cannot break through the dense stratum corneum. The scrub helps make the top layer thin, and the hairs grow out.

For 2-3 days after waxing, it is better to refrain from visiting saunas, swimming pools and gyms, since pathogenic microorganisms can penetrate through the microtraumas of the skin obtained during the session.

It is also necessary to wear loose clothing after the procedure to eliminate unwanted friction and not to provoke a change in the position of the hair follicle, which can lead to ingrown hairs.

In addition, clothing and linen should be made from natural fabrics. Synthetics have poor breathability. Impaired air exchange causes increased sweating, and drops of sweat act as an excellent environment for the development of microorganisms. When pathogens get into the pores, they can cause inflammation, folliculitis, pustules, etc.

How to use wax cartridges

Using depilatory wax in a cartridge is quite simple if you follow the instructions and follow safety precautions.

  1. Clear the intended area of ​​contamination.1
  2. Disinfect the skin with an antiseptic.2
  3. Warm up the cartridge in a convenient way.3
  4. Test the wax to make sure it is at the right temperature by making a small mark on the paper or your wrist. The mass should lie in an even layer.4
  5. Apply wax to the area to be treated, taking into account the size of the paper strip, it should cover the entire sticky layer. When applying the hot mass, you need to slightly hold the skin just above the area to be epilated.5
  6. Place the paper on your body and carefully “glue” it to the wax, moving along the hairline.6
  7. After waiting a few seconds, sharply remove the strip in the direction of hair growth.7
  8. Move further along the intended area, repeating the previous steps.8
  9. At the end of the procedure, treat the skin with a soothing product to prevent irritation.9
  10. If there are pieces of wax left on the body, remove them using oil, special lotion or napkins, or rich cream.

Preparation for the procedure

Depilation with cassette wax will be most effective if the skin is properly prepared.

First of all, you need to know that the length of the hairs before the session should vary from 3 to 7 mm. Short hairs may not be captured by the applied wax, and the procedure for longer hair is accompanied by severe pain.

A day before waxing, it is advisable to treat the problem area with a scrub. Then the abrasive particles will remove the stratum corneum, and the hairs will be pulled out along with the root less painfully.

Immediately before the session, experts advise steaming the skin surface. When exposed to heat, the pores will open, which will also make it much easier to remove unwanted hair.

How to heat wax in a cartridge without a wax melter reviews

Guest

I heat it in the microwave. I put the wax cartridge in for 30-60 seconds, but my friend’s wax melter warms up until the wax melts and it takes 20 minutes (((

****

Madame Horsesponge

It is better to heat it in a water bath. In the microwave it heats up to boiling water too quickly and unevenly.

****

Olga

I put the cartridge on a bag in the microwave. if it’s very hot, then wait a minute it will cool down and it’ll be fine. You will rarely use it (not a razor - not every day), and this garbage also takes up space in the house

****

I always heat it in the microwave, there are no problems, a full cartridge heats up in 50 seconds

How to heat wax in a cartridge without a wax melter video

Sources

https://intvaleo.ru/kak-razogret-kartridzh-s-voskom-v-mikrovolnovke-kak-luchshe-vsego/

https://badhairs.ru/udalenie-volos/depilyacia-voskom-v-kartridzhah

https://britvam.net/depilyacziya/vosk/kak-razogret-vosk-v-kartridzhe.html

https://zlatamoda.ru/vosk-v-kartridzhah-mozhno-razogrevat-v-mikrovolnovke-kak-polzovatsya.html

https://ilcosmetic.ru/uhod-za-telom/depilyatsiya/vaksing/kartridznyj.html

https://itpressa.ru/kak-luchshe-vsego-razogret-vosk-v-kartridzhe-kak-polzovatsya-plenochnym-voskom/

Rating
( 2 ratings, average 4.5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]